They always add acid to

Description of your first forum.
Post Reply
fomayof928@mowline
Posts: 487
Joined: Sun Dec 22, 2024 4:02 am

They always add acid to

Post by fomayof928@mowline »

This allows the entire plaster surface of the pool to be thoroughly cleaned, ensuring that the acid reaches all areas that need attention. Using Acid Pool Cleaning Fluid Once the pool is drained, it’s time to prepare the acid solution. This usually involves diluting muriatic acid with water according to the manufacturer’s instructions. Your pool cleaner does not add water to the acid during this phase.


They always add acid to water to avoid a brazil whatsapp resource dangerous chemical reaction. They also wear appropriate personal protective equipment (PPE) such as gloves, goggles, and long-sleeved clothing during this step. Then they carefully poured the diluted acid solution onto the pool's walls and floor, starting at the deep end and working their way up. Scrub and clean pool surfaces After application, the entire surface of the pool will be scrubbed with a stiff pool brush.


This helps to agitate the solution and loosen up accumulated dirt, stains, and minerals. Pay close attention to stained areas and areas of heavy buildup. Flushing and neutralizing acids The technician will use a high-powered hose to spray the pool walls and floor, ensuring no acid remains. After rinsing, a neutralizing solution (usually sodium bicarbonate or baking soda) will be applied to the pool surface to neutralize any remaining acidity.
Post Reply