There is no voltage in the network

[shapanwwuom]

Repair of the electrical part of the hammer drill, diagnostics of breakdowns and their elimination
Most often, as practice shows, the breakdowns of the hammer drill occur in the electrical part, so it is from there that you need to start diagnostics. If the tool works, but at the same time crackles, hums or makes other sounds, then the breakdown should be looked for in the electrical part, so it is immediately recommended to skip the point about repairing the electrical part and proceed to eliminating breakdowns in the mechanics.

Diagnostics of the electrical part depends on what kind of breakdown iraq telegram data has occurred - the device shows no signs of life or it works, but sparks, smokes or periodically switches off. So, to repair a hammer drill without outside help, you must follow the instructions.Let's look at the main types of breakdowns and how to fix them.

The engine does not start and shows no signs of life.
The most common breakdown is when the tool does not turn on. The reasons may be different factors - from the lack of electricity in the socket to the breakdown of the electric motor. But you need to start looking for the cause from the smallest to the largest, and not vice versa. It is inappropriate to immediately disassemble the hammer drill if it does not show signs of life, since this can be facilitated by such types of malfunctions as described below.

It's trivial, but this is the reason why such types of breakdowns occur in 15% of cases. You are working, and suddenly the tool stops showing signs of life. Check for electrical voltage in the room immediately. Even if the lights in the room turn on, this does not mean that everything is in order. Perhaps, while drilling or using a hammer drill, you caught a wire in the wall that powers the socket.