When asked how to make diagrams
Posted: Mon Dec 23, 2024 9:42 am
That is, he advocates for the centralization of design data, for the development of the entire set of documentation in one software.
, the expert replied that connection diagrams can be combined into groups using regular detail lines or families can be created.
But regarding the installation diagrams, he warned all the listeners never to make them on a section from Revit, because at some point a certain element may change its position, and you will have to change the diagram.
Specifications
In general, when working with specifications, everything is quite clear: if you insert an element into the model, it will be included in the specification; if you don’t insert it, it won’t be included.
However, in the case of low-current systems, there is one peculiarity: low-current systems have many non-modeled elements that relate to objects within the model. For example, a socket has a frame, a module, a support. Therefore, the expert recommended immediately inserting these elements into families and then managing them. Gennady Dryagin also noted that Revit is very convenient for compiling specifications of node elements.
However, we understand that the best way to understand the benefits of the described functions is to see them with your own eyes. That is why we offer you to download scribing - in it you will find not only screenshots of the specifications created in Revit, but also diagrams and cable logs.
Cable magazines
The approaches to compiling cable logs differ based on the system topology. The first is for the Tree type topology. In this case, Gennady Dryagin recommended using standard Revit tools for working with circuits. And the second approach is for the Ring topology. In it, in fact, all information about the cable is entered into the line itself.
As a result, regardless of the topology you worked with, all the information will end up in phone number italy the cable log, which you can then download without having to worry about formatting it in Revit.
What's going on with automation?
Gennady Dryagin proudly emphasized that he is the author of the function for automatic creation of structural diagrams with element-model, diagram-model, model-diagram links. It is especially useful when working with small diagrams.
How exactly this function works, you can see in scribing using the example of working with schemes, cable routes, etc.
In conclusion
Unfortunately, the use of BIM technologies and Revit among low-current designers is still poorly spread, which negatively affects the consolidated information models of objects. The information component of the model components is also insufficient, and these sections are less often used in other scenarios for the use of BIM technology
For novice Revit users, developing CC sections is more like a battle of "crutches". However, these "crutches", in comparison with classical approaches, ultimately speed up the development process - using Revit allows you to significantly increase the speed and quality of the documentation produced
It is quite reasonable to use Revit for developing all sections of low-current systems due to flexible methods of working with data, drawings and their components
, the expert replied that connection diagrams can be combined into groups using regular detail lines or families can be created.
But regarding the installation diagrams, he warned all the listeners never to make them on a section from Revit, because at some point a certain element may change its position, and you will have to change the diagram.
Specifications
In general, when working with specifications, everything is quite clear: if you insert an element into the model, it will be included in the specification; if you don’t insert it, it won’t be included.
However, in the case of low-current systems, there is one peculiarity: low-current systems have many non-modeled elements that relate to objects within the model. For example, a socket has a frame, a module, a support. Therefore, the expert recommended immediately inserting these elements into families and then managing them. Gennady Dryagin also noted that Revit is very convenient for compiling specifications of node elements.
However, we understand that the best way to understand the benefits of the described functions is to see them with your own eyes. That is why we offer you to download scribing - in it you will find not only screenshots of the specifications created in Revit, but also diagrams and cable logs.
Cable magazines
The approaches to compiling cable logs differ based on the system topology. The first is for the Tree type topology. In this case, Gennady Dryagin recommended using standard Revit tools for working with circuits. And the second approach is for the Ring topology. In it, in fact, all information about the cable is entered into the line itself.
As a result, regardless of the topology you worked with, all the information will end up in phone number italy the cable log, which you can then download without having to worry about formatting it in Revit.
What's going on with automation?
Gennady Dryagin proudly emphasized that he is the author of the function for automatic creation of structural diagrams with element-model, diagram-model, model-diagram links. It is especially useful when working with small diagrams.
How exactly this function works, you can see in scribing using the example of working with schemes, cable routes, etc.
In conclusion
Unfortunately, the use of BIM technologies and Revit among low-current designers is still poorly spread, which negatively affects the consolidated information models of objects. The information component of the model components is also insufficient, and these sections are less often used in other scenarios for the use of BIM technology
For novice Revit users, developing CC sections is more like a battle of "crutches". However, these "crutches", in comparison with classical approaches, ultimately speed up the development process - using Revit allows you to significantly increase the speed and quality of the documentation produced
It is quite reasonable to use Revit for developing all sections of low-current systems due to flexible methods of working with data, drawings and their components